Designer & Manufacturer of Perfume Bottle Packaging

DECORATE YOUR BOTTLES

Various Kinds Of Decoration Processing Bring Your Ideas To Reality
Home / Decorations

DECORATE YOUR BOTTLES TO BE INDIVIDUAL STYLEdecor

ANTI ALCOHOL

GP Bottles@Surface decoration is a crucial process to enhance the appearance and quality of perfume bottle, attract the first attention of customer to increase the sales.

Actual bottle treated with GP Bottles@Decor on the surface. Individual Style

GP Bottles@Decorations

GP Bottles has been providing deep finish decoration service for perfume bottles packaging, including color coating (transparent coating, semi-transparent coating, bottom coating, non-transparent coating, rubber coating-soft touch, partial coating, gradual coating, matte coating, inner coating), silk screen printing, hot stamping, sleeve coating , vacuum plating, decal, heat transfer printing, water transfer printing, laser engraving, UV printing, frosting, fire-polishing, hand polishing etc.

Hyamax®Extra Deep

The picture is for reference and results may vary in different patients.

Photographs taken before and two weeks after treatment with Hyamax®Extra Deep for frown lines, lines, laugh lines and crow's feet.

The satisfaction level of most patients was very high.

More Information About GP Bottles@ Decoration

GP Bottles® Decoration Technologies
  • What is spray coating?

    GP Bottles@Spray painting is a process of evenly spraying pigment on the surface of a perfume bottle. The process typically involves the following steps: 1. Cleaning and preparation: Prior to spray painting, the surface of the perfume bottle needs to be thoroughly cleaned to ensure that there is no dust, grease, or other dirt. 2. Preparing the pigment: The pigment is prepared to the required color and texture based on the client's specifications. 3. Spray painting: A spray gun is used to evenly apply the pigment onto the surface of the perfume bottle. 4. Drying and curing: The perfume bottle is allowed to air-dry or the pigment can be cured through heating to ensure that it adheres firmly to the bottle's body. Spray painting can create various colors and effects on perfume bottles, such as gloss, matte, and metallic finishes, thereby enhancing the product's visual appeal.

    What's the MOQ of spray coating?

    5,000 pcs per model per color

    What's the different effect of spray coating we can do?

    Bright, matte, non-transparent, semi-transparent, transparent, gradual, soft-touch, partial coating, inner coating.

    What's the sample policy of spray coating?

    GP Bottles can make samples according to your requiremnt, pantone no. or description or physical sample, the samples will be for free.
  • What is perfume bottle metallization?

    First, the perfume bottle is cleaned and prepped for plating by being thoroughly washed and dried. Then, it is placed in a vacuum chamber, which is sealed tight to create an air-tight environment.Next, a thin layer of metal is deposited on the surface of the bottle through a process called sputtering. Sputtering involves bombarding the metal with ions, causing it to vaporize and deposit on the surface of the bottle.Once the metal has been deposited, a process called electroplating is used to apply a thicker layer of metal to the surface of the bottle. In this process, the bottle acts as the cathode and is dipped into a solution of metal ions. An electric current is then applied to the solution, causing the metal ions to be attracted to and deposited onto the surface of the bottle.Finally, the bottle is removed from the vacuum chamber and inspected for quality. Any imperfections are corrected, and the finished product is ready for use.

    What's the MOQ of perfume bottle metallization?

    10,000 pcs per model per color.

    What's the different effect of metallization we can do?

    Non-transparent, semi-transparent, gradule, iridescent.

    What's the sample policy of metallization?

    We can make the samples based on your requirement, such as color tones, effect, physical samples, samples will be for free.
  • What is silk printing of logo or pattern?

    Silk printing is a popular method for decorating perfume bottles, and it involves using a special technique to apply ink to the surface of the glass. Here's a step-by-step guide:1. The first step in silk printing is to create a stencil or screen. This is done by coating a fine mesh screen with a light-sensitive emulsion and exposing it to ultraviolet light through a film positive of the design.2. Once the screen is prepared, a squeegee is used to spread the ink across the stencil. The ink is forced through the tiny holes in the screen and onto the surface of the glass.3. Once the ink is applied, the glass is dried and cured at high temperatures. This helps to ensure that the ink adheres to the surface of the glass and doesn't rub off easily.4. Depending on the design, multiple layers of ink may be applied to achieve the desired color and effect. This process is repeated until the design is complete.5. Finally, the perfume bottle is inspected for quality control before it is packaged and shipped to the customer.

    What's the MOQ of spray coating?

    5,000 pcs per model per style

    What's the max colors of silk printing we can do?

    Maximum 3 colors can be print on the bottle, the size is depending on the shape of bottle.

    What's the sample policy of spray coating?

    GP Bottles can make samples based on logo file, picture or physical sample, the samples will be for free.
  • What is process of hot-stamping logo or pattern?

    Hot stamping is a process of printing a design onto a surface using a heated die and foil. In the case of perfume bottle manufacturing, hot stamping is typically used to apply metallic or holographic designs onto the glass or plastic bottle.The first step in hot stamping is to create a custom die that matches the desired design. This die is usually made from metal, such as brass or copper, and is heated to a high temperature to transfer the design onto the foil.Next, the foil is loaded into the hot stamping machine and the bottle is positioned underneath the machine's stamping head. The machine presses the heated die onto the foil, causing the design to transfer onto the surface of the foil.Finally, the foil is transferred onto the surface of the bottle using pressure and heat, resulting in a permanent metallic or holographic design on the bottle. The entire process can be completed quickly and efficiently, making it a popular choice for adding decorative elements to perfume bottles.

    What's the MOQ of spray coating?

    5,000 pcs per model per style

    What's the color of hot-stamping we can do?

    Gold, silver and pink, the logo or pattern size is depending on shape of bottle.

    What's the sample policy of hot-stamping?

    GP Bottles can make samples based on logo or pattern file, picture or physical sample, the samples will be for free.
  • What is glass bottle frosting?

    Glass bottle frosting is a process that involves chemically etching the surface of glass bottles to create a frosted or matte finish. The process is typically done using hydrofluoric acid or other chemical solutions that are applied to the surface of the glass.The first step in the process is to clean the glass bottles thoroughly to remove any dirt, dust, or oils. Once the bottles are clean, they are dipped into a solution of hydrofluoric acid or other chemicals. This solution dissolves the outer layer of the glass, leaving behind a frosted or matte finish.The amount of time that the bottles are submerged in the acid solution will determine the level of frosting that is achieved. After the desired level of frosting is achieved, the bottles are rinsed with water to remove any residual acid and then dried.There are many factors that can affect the final appearance of the frosted glass bottles, including the type of acid or solution used, the concentration of the solution, the temperature and duration of the process, and the type of glass being used.Overall, the glass bottle frosting process requires careful attention to detail and proper safety precautions, as the chemicals involved can be hazardous if mishandled. But with the right expertise and equipment, it is possible to create beautiful frosted glass bottles that are perfect for displaying and dispensing perfumes and other fragrances.

    What's the MOQ of frosting?

    5,000 pcs per model.

    What's the different effect of spray coating we can do?

    frosted or matte.

    What's the sample policy of spray coating?

    GP Bottles can make samples of frosting for free.
  • What is glass bottle flocking?

    Flocking is a technique used to create a soft, velvety texture on the surface of glass. In the case of perfume bottles, flocking is used to create a textured surface on the exterior of the bottle that looks and feels like velvet. Here are the steps involved in the process:1. The glass bottles are first cleaned and dried to remove any dust or debris.2. A special adhesive is applied to the surface of the bottle where the flocking will be applied.3. The bottles are then placed in a machine that sprays tiny fibers of material onto the adhesive-coated surface.4. The fibers are electrostatically charged, which helps them adhere to the adhesive and stay in place.5. Once the flocking is complete, the bottles are heated to cure the adhesive and set the flocking in place.6. Finally, any excess flocking is removed from the surface of the bottle.The end result is a beautiful, velvety texture that adds an extra level of luxury and sophistication to the perfume bottle.

    What's the MOQ of flocking?

    5,000 pcs per model per color

    What's the different color of flocking we can do?

    It depends on the color of fabric.

    What's the sample policy of spray coating?

    The sample cost of glass bottle flocking is depending on the size of bottle and flocking color.
  • What is water/heat transfer printing?

    Glass bottle transfer printing is a process of printing a design onto the surface of a glass bottle using a special type of paper and ink. Here are the general steps involved:1. Choose a design: The first step is to choose the design that you want to print onto your glass bottle. This could be anything from a simple logo to a complex full-color image.2. Prepare the design: Once you have the design, you'll need to prepare it for transfer printing. This involves creating a mirror image of the design so that it will be printed in the correct orientation on the bottle.3. Print the design onto transfer paper: Next, the design is printed onto transfer paper using special inks that are designed to adhere to glass surfaces.4. Apply the transfer paper to the bottle: The transfer paper is then carefully applied to the surface of the glass bottle and pressed into place.5. Transfer the design onto the bottle: The transfer paper is then heated, causing the ink to transfer from the paper to the surface of the glass bottle.6. Remove the transfer paper: Once the transfer is complete, the paper is carefully peeled away, leaving the completed design on the surface of the glass bottle.7. Finish the bottle: Finally, the finished bottle is inspected for quality and any additional finishing touches, such as labeling or packaging, are added.Overall, glass bottle transfer printing is a precise and delicate process that requires specialized equipment and expertise in order to produce high-quality results.

    What's the MOQ of spray coating?

    10,000 pcs per model per color

    What's the different effect of spray coating we can do?

    We can design or customize the pattern based on the shape and size of glass bottle.

    What's the sample policy of spray coating?

    GP Bottles can make samples according to your requiremnt, pictures or desription or physical sample, the samples cost will be calculated according to design and bottle shape.
  • What is laser engraving on the glass bottle?

    The process of laser engraving on a glass bottle involves using a high-powered laser beam to etch the surface of the glass in a specific pattern or design. This process achieves a precise and detailed result that is both permanent and aesthetically pleasing. Here are the steps involved:1. Design creation: The first step is to create the design which will be engraved onto the glass bottle. This can be done using computer software such as Adobe Illustrator or CorelDRAW.2. Preparing the glass: Next, the glass bottle is thoroughly cleaned and dried to remove any oils or moisture from its surface. This ensures that the laser beam does not get distorted during the engraving process.3. Positioning the glass: The glass bottle is then carefully positioned within the laser engraving machine. The machine's software is used to align the design with the surface of the glass.4. Engraving the design: The laser beam is then activated and directed onto the surface of the glass, carving out the pattern or design that was created. The depth of the engraving is controlled by adjusting the power and speed of the laser.5. Final touches: Once the engraving is complete, the glass bottle is inspected for any imperfections or irregularities. If necessary, the surface is polished to ensure a smooth and even finish.And there you have it! That's the basic process of glass bottle laser engraving.

    What's the MOQ of spray coating?

    5,000 pcs per model per color

    What's the different effect of spray coating we can do?

    The effect is depending on the the design of art work based on the glass bottle design.

    What's the sample policy of spray coating?

    GP Bottles can make samples according to your requiremnt,picture or description or physical sample, the samples will be calculated according to artwork and bottle shape.

START A PROJECT

GP Bottles has an excellent decoration product line

GP Bottles@ FAQ of Design & Contract Manufacture

Important Information

What’s the minimum order quantity of a customized glass bottle perfume packaging?

Normally it requires 30,000 pcs per model for minimum order quantity for a customized glass bottle perfume packaging. Why a lot? On the production of glass bottle, we need to install the mold on the automatic machine to produce the glass bottle, that may take 5-6 hours to finish the install and debug to have the good quality production conditions. It could produce more than 30,000 pcs during the 5-6 hours, that makes higher cost during the mold install and debug. In another word, we may require 30-50% higher of unit price if you want to place small quantity order.

How Can I get a cost reference before starting the procedure of perfume bottle customization?

If you want to get a cost reference, we’ll make a initial quotation based on existing design of glass perfume bottle packaging. After the design finished, we can send a final quotation for your decision to next step.

How Can I Create My Own Perfume Bottle?

Creating your own perfume bottle can be a fun and creative process. To start, you can choose a design that fits your scent and aesthetic. Next, you should determine the material, size, and shape of the bottle that best suits your needs. Once you have chosen these elements, you will need to find a manufacturer or supplier to help you with the production of your bottle. Finally, you can add labels, decorations, and embellishments to personalize your bottle. With some planning and creativity, you can create a unique and distinctive perfume bottle.

What's The Proccess Of Perfume Packaging Customize Design?

Idea

The idea of design would be a kind of picture, think, style or actual sample. GP Bottles will draw several sketches according to the idea for reference. You can check it and choose which one need to be developed.

Drawings

After determining the sketch to develop, GP Bottles designer will work it to lay out full set drawing including 2D drawing, 3D rendergraph to show you the details of design.

3D Mock-up

Along with the developing of 3D printing technology, we now have the chance to check the unexpected problems before actual production, it's really the key processing of perfume packaging design and development. GP Bottles can make the Mock-up with acrylic material for glass perfume bottle, and aluminium or plastic material for perfume caps. You can check the match up between the bottle and cap, and the whole effection of the total design.

Consult GP Bottles@ Let's Create It Together
GP Bottles is not only manufacturing perfume bottles, but is designing perfume bottle to comply with the orientation and culture of your perfume brand, and we're considering "Elevate Scores Of Your Perfume Brand" as our mission, consult us now to create together.
*Email
*Name
*Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.